Model Number: WF-ABS-023
Brand Name: Forthwill
Key Specifications/Special Features:
DescriptionThe ABS solar mounting bracket can be used with any aluminium framed solar panel to provide a secure fixing for vehicles, caravans, boats, outbuildings etc. The mounts will support the solar panel at the optimum height above the surface to enable aeration from underneath, ensuring the solar panel functions as efficiently as possible.Product featuresCorner mounting brackets for solar panelsDrill-free mounting option, easily glued on withSikaflex 252, (Sold Separately)Durable, UV-resistant ABS plastic constructionIncludes 4 corner glue mounts
1-year limited warranty
Installation
The brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to drill a clearance hole in the ABS brackets at the appropriate recessed ports. Once the brackets are attached to the panel the whole can be bonded to the roof surface.
Features
Application: RV, caravan, yacht, motorhome, flat Roof
Primary competitive advantages:
Product certifications: AS/NZS 1170.2(Roof Mount) Standard
1-year limited warranty
Installation
The brackets are first be screwed or bolted to the solar module using suitable stainless steel self-tapping screws. You will need to drill a clearance hole in the ABS brackets at the appropriate recessed ports. Once the brackets are attached to the panel the whole can be bonded to the roof surface.
Features
- An ideal way to fix solar panels on the roof or deck of motor home, caravans, boats & roof.
- The mounts can be safely bonded to the surface removing the need to drill holes using Sikaflex-252.
- Mounts also act as a wind deflector and maintain the correct air gap between the solar panel and the roof top/deck.
- The Panel Corner Bracket protect the corners of the solar panels from damage.
- Reduces sharp corners on the solar panel and helps make protective storage covers easier to put on and off.
- ABS plastic made, environment friendly and UV resistance.
Application: RV, caravan, yacht, motorhome, flat Roof
Primary competitive advantages:
- Professional design
- Experienced staff.
- Have our own R and D team to develop new products and improve products' quality constantly
- Easy and quick installation
- Pressure equalization vents at the top of the sunny-mount ensure module stability at high wind, air circulation and module cooling
- Warranty: 10 years & Durable for 20 years
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid-East/Africa
- North America
- Western Europe
Product certifications: AS/NZS 1170.2(Roof Mount) Standard
Installation Manual |
1. You will need to drill a clearance hole in the ABS brackets at the appropriate recessed ports. |
Place the panel mounts on a flat surface, then position the panels onto the mounts. Drill a pilot |
hole through mount directly into panel frame. When drilling the holes in the solar panel frame to |
attach the bracket try and drill the hole more towards the center of the panel frame to avoid any |
damage to the solar panel glass and cells. |
2. Attach the brackets to the solar panel frame using a self-tapping stainless steel or |
galvanized screws |
3. Mark the mounting location for the panels on the surface to which the panels will be mounted. |
4. After applying the Sikaflex-715 to your Brackets install them to your pre marked position on |
your roof. Ensure you have the panel orientated so the wires/cables coming out the back are on the |
correct side. Following the Sikaflex-715 installation instructions that come with the Sikaflex |
product; lightly press down over the top of each bracket to ensure the Sikaflex-715 makes a good |
contact with all surfaces. |
5. Refer to the Sikaflex instructions and allow the required time for the Sikaflex - 715 |
to completely dry before connecting the wires/cables. |
HELPFUL TIP: To help reduce the wires flapping on the roof while you are travelling put |
some Sikaflex-715 on the wires in Various Places and adhere them to the roof. |
6. While you are waiting for the Sikaflex-715 to dry, install your PV charge controller in the |
permanent position you have previously chosen. It is recommended the PV Charge Controller |
should be installed in a dry, sheltered location away from sources of high temperature and moisture. |
PLEASE NOTE: This instructions are a simple guide for the installation of the U-MO-ABS Series |
Plastic Panel Mounts. It is most important you follow the Sikaflex715 ( or other manufacturer ) |
Ind tructions to ensure the panels are mounted safe and secure. |
Shipping Information:
- FOB Port: Xiamen
- Lead Time: 3 - 7 days
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe